Epoxy Flooring in Elk Run Heights, IA

Epoxy flooring in Elk Run Heights is mostly about one kind of house. The city was established in 1951, and ACS estimates summarized by Point2Homes show 212 of its 466 homes were built in the 1950s. That is 45.5% of the housing from a single decade. Nearly all of it is single-family: 448 units are one-unit detached homes, and 93.2% of occupied homes are lived in by their owners.

People here tend to stay. The 2020 census put the median age at 45.8, and Wikipedia's figures show the town's population barely moved over twenty years, from 1,052 in 2000 to 1,069 in 2020. Homeowners who have been in the same house for a long time are often the ones who finally decide to fix the garage floor they have looked at every day.

What a 1950s garage floor looks like now

• Thin, older concrete that may not have the reinforcement a newer slab would.
• Expansion cracks that have opened slowly over decades.
• Salt scaling in a band near the overhead door.
• Oil shadows under where the car has parked for years.

Oil is the one people underestimate. It soaks deep into old concrete, and resin will not stick to it. We degrease, grind, and if needed treat the stained area with an oil-stop primer before the base coat.

Get a Free Estimate

Choosing a finish you can walk on safely

A smooth, glossy coating can get slick when snowmelt drips off a car. For Elk Run Heights garages we usually suggest a full flake broadcast. It gives a textured surface underfoot. If you want even more grip, we can add a fine anti-slip aggregate to the topcoat. It is a small change to the quote and worth it on a floor you cross every day in winter.

Basements in small ranch homes

Many homes from this era have basements used for laundry, storage or a workbench. A light-colored basement epoxy brightens a dim room and makes spills easy to clean. We check moisture first, since older basement slabs were often poured without a vapor barrier under them.

Preparing a garage you've filled for decades

After forty or fifty years in one house, a garage tends to fill up. We need the floor empty to grind and coat it edge to edge, and that is often the hardest part of the job for the owner. Plan a weekend to clear it. Wall shelving that stands on the floor needs to come out as well. Hooks and wall-mounted racks can usually stay.

Easier upkeep as the years go on

A sealed floor is easier to look after than bare concrete. Dust does not rise off it, spills stay on top, and a quick sweep and damp mop is usually all it needs. For owners who want less work in the garage, that is often the main reason to coat.

Small shop corners

Some garages here hold a workbench or a lawn tractor along with the car. Gas, oil and fertilizer all get spilled on a garage floor sooner or later. A chemical-resistant topcoat over the flake handles those spills, and we can build the coating a little thicker under a bench where tools get dropped.

What the visit looks like

We come out, measure the garage, and look at the cracks, the oil spots and the door strip. A moisture meter tells us whether the slab is dry enough to coat. Then we write up one price that lists the system, the repair work and the number of coats. Nothing is added without your written approval.